AGS OFF service in Tbilisi
AGS OFF Active grille shutter software deactivation
AGS (Active Grille Shutter) is the active radiator shutter system. If the shutters jam or a fault appears, we check the mechanism, actuator and ECU and determine whether software deactivation is possible.
Warm-up
- Shutter opening
- 100%
- Coolant
- 52.0°C
- Control
- Active
As a cold engine warms up, the shutters gradually close and reduce incoming air at the radiator. The opening request depends on cooling demand.
How the system works
What is AGS and how does it work?
AGS (Active Grille Shutter) is a system of active shutters in front of the radiator. Opening and closing them regulates the airflow towards the cooling system.
The ECU adjusts shutter position according to cooling demand. Closed shutters reduce aerodynamic drag and help the engine warm up in cold weather. Opening them when needed lets air reach the radiator.
A damaged mechanism, actuator or wiring may cause a position fault. AGS OFF disables the relevant software control and monitoring, while a clear passage for airflow must be maintained physically.
Software changes
- The relevant software logic for AGS actuator control is disabled
- Shutter position and movement monitoring is changed
- The relevant software requirements for checking AGS operation are disabled
- Selected fault codes related to the AGS system are disabled
- Other AGS-related software parameters are changed according to the vehicle and ECU
AGS OFF does not include changes to thermostat or fan control. We check other cooling components separately.
Recognising the problem
When do we check the active shutters?
Shutter fault
Diagnostics show a position, actuator or communication code. We compare the requested position with the actual condition of the mechanism.
Jammed mechanism
The shutters fail to open or move freely. We check for mechanical damage, obstructions and a clear airflow passage.
Modified front end
After replacement of the bumper or shutter assembly, the system configuration differs. We check the fitted parts and software support.
The airflow passage towards the radiator must be open. Software cannot open shutters jammed in the closed position — their position must be corrected mechanically.
Stages
Four stages of the work
- Diagnostics and readingWe check faults, shutter position, the actuator and wiring. We identify the ECU and read the relevant software.
- Custom calibrationWe change the relevant AGS control, position monitoring and fault codes.
- Writing the softwareWe write the processed software to the ECU and check that writing has completed.
- TestingWe check the relevant faults, a clear airflow passage and cooling system operation.
Questions and answers
Frequently asked questions
Can the shutters remain closed?
No. If closed shutters restrict airflow to the radiator, the passage must be cleared mechanically. Software deactivation cannot move a jammed mechanism.
Does fan or thermostat operation also change?
No. This service concerns AGS control. Changes to fan and thermostat calibration are separate work. AGS OFF cannot fix faults in those components.
Is disconnecting the connector enough?
Disconnecting the connector alone does not disable AGS monitoring in the ECU and may leave a fault. We decide the connector configuration according to the specific vehicle’s wiring diagram and software work.
What changes after deactivation?
Automatic shutter control no longer operates. An open passage lets air through, but the factory system’s aerodynamic and warm-up benefits are lost. We check the result on the specific vehicle.
Have a radiator shutter fault?
Send us the model, year, engine and fault code. Tell us whether the shutters are open, closed or removed — we will explain what checks are needed. Consultation is free.