Sound calibration in Tbilisi
Pops & Bangs Exhaust sound software calibration
Pops & Bangs is software calibration that produces exhaust crackles when the accelerator pedal is released. We check engine condition, the ECU and exhaust configuration, agree the desired sound effect and prepare software tailored to the vehicle.
Normal
- Engine speed
- 3200RPM
- Accelerator pedal
- 0%
- Pulse intensity
- 0%
Normal operation without an added crackle effect.
How the system works
What is Pops & Bangs and how does it work?
Pops & Bangs is ECU calibration that creates exhaust crackles or changes their character when the accelerator pedal is released. This effect is also called crackle or burble.
We change fuel-delivery and ignition parameters in the ECU software. Effect strength, duration and engine-speed range depend on the engine, ECU and exhaust design.
We agree the sound character and intensity before work. We consider the condition of the muffler, catalyst, installed GPF and, on turbocharged engines, the turbocharger, as well as additional thermal load. The same effect is not possible on every vehicle.
Software changes
- Adjust fuel-delivery parameters when the accelerator pedal is released
- Tailor ignition parameters to the desired sound effect
- Select effect strength, duration and engine-speed range
- Link the effect to a driving mode where the ECU supports it
- Adjust other sound-effect software parameters for the engine and ECU
Increases in power and torque are agreed separately.
Choosing the sound
What do we consider when choosing the sound?
Desired sound and mode
We agree crackle character, strength, duration and engine-speed range. Depending on the ECU, we check whether the effect can be linked to a driving mode.
Exhaust configuration
We check the muffler, pipes, connections, catalyst and GPF. We select intensity with the existing system and added thermal load in mind. Necessary mechanical work is agreed separately.
Proper engine operation
Misfires, fuel-system faults or exhaust leaks must be corrected first. On turbocharged engines, we also check the turbocharger. Sound calibration cannot replace repairs.
The sound change must also suit the conditions of use. Consider the surroundings and applicable noise requirements. This software cannot ensure a vehicle inspection pass; the result depends on vehicle condition and applicable requirements.
Stages
Four stages of the work
- Diagnostics and readingWe check the engine, faults, ECU and exhaust system. We agree the desired sound and read the software via OBD, Bench or Boot.
- Individual calibrationWe adjust fuel delivery, ignition parameters and effect activation conditions for the exhaust configuration and agreed sound.
- Writing the softwareWe write the processed file to the ECU and verify that writing has completed.
- TestingWe check engine operation, faults and the effect under the agreed conditions. We listen to the sound and adjust intensity if needed.
Questions and answers
Frequently asked questions
Does Pops & Bangs also increase power?
The purpose of this service is to tailor exhaust sound. If you also want more power and torque, we agree the corresponding calibration separately.
Is it possible on my vehicle?
We assess feasibility on turbocharged and naturally aspirated gasoline engines. We check the ECU, software version, engine condition and exhaust system. We do not offer this service for diesel engines.
Can it be done with the catalyst or GPF retained?
On some vehicles, yes. Mild, brief crackles at low engine speeds may be possible with the catalyst and GPF retained. Some models have a similar factory effect with calibration and protective parameters tailored to the system. Strong crackles at high engine speeds create additional thermal load. In that case, exhaust modifications and removal of the catalyst or GPF are discussed separately for the specific configuration.
Can the sound be switched on and off?
On some ECUs, the effect can be linked to a particular driving mode or disabled in software. Control using a button or mode selection is not available on every vehicle. We agree the available mode and activation conditions before work.
Let’s choose the sound you want
Send the vehicle model, year and engine. Describe the current exhaust configuration and desired sound. We will explain which data and checks are needed. Consultation is free.